Blade vs. Bump N Grind Texture Comparison

Description

Take control of the tightness with the Blade by Fleshlight. The Blade features a beautifully designed squeezable hilt-shaped case and a new sharply intense texture.

Characteristics

The Fleshlight Blade canal is a multi-chamber system which consists of four differently sized chambers and which is covered by a distinctive ribbed texture along the entire length. The chambers have been deliberately designed with a relatively wide diameter of up to 0.8 inches (20 mm) so that they can be tightened by squeezing the flexible masturbator case.

The Blade canal starts with a 1.2 inch (30 mm) entry passage with smooth side walls which extends to the first 0.6 x 0.6 inch (15 x 15 mm) wide chamber. From this point, a highly dense cross-rib texture begins, which covers the entire length of the inner canal and the surface of all chambers that follow. These ribs are each 0.1 inch (3 mm) wide and separated by 0.15 inch (4 mm) wide ridges. Next there is a tight 0.4 inch (10 mm) connecting canal that expands after a length of 0.6 inches (15 mm) to the second chamber. This chamber has a circular shape and measures 0.8 x 0.8 inches (20 x 20 mm). The passage to the next chamber is 0.4 inch (10 mm) wide and is again very tight. The third chamber has an elliptical shape and is 1.2 inches (30 mm) long and expands to a diameter of up to 0.8 inches (20 mm). After a further 0.4 inch (10 mm) connecting passage comes the fourth and last chamber of the canal. This chamber is also elliptically shaped, has a diameter of up to 0.8 inches (20 mm) and is, with a length of 2.7 inches (20 mm), the largest chamber of the Blade insert.

Description

First you'll enter past the three rows of alternating speed bumps and ribs, then on to the grinding action of the vortex, another set of bumps, and then vortex again, and if you're still going, you've got one more soft set of larger bumps that will softly welcome you home with a nice hug.

Characteristics

The canal texture starts with a 0.8 x 0.6 inch (20 x 15 mm) smooth walled chamber, which has a ring of flat hemispheric bumps at the end. The shape and size of the bumps is comparable to those of the Speed Bump Insert. Next is a 0.4 x 0.6 inch (10 x 15 mm) chamber containing another ring of hemispheric bumps. This is followed by a third 2.35 x 0.7 inch (40 x 18 mm) chamber that has a ring of hemispheric bumps at the chamber entrance as well as the exit with a zigzag-shaped ridge texture in the center. Experienced Fleshlight users will be familiar with this ridge texture because it has been partially borrowed from the Vortex Insert. The fourth chamber has the same structure as the preceding chamber except for some additional bumps at the end.