Mini-Lotus vs. Blade Texture Comparison

Description

The Mini-Lotus features all the realistic vaginal sensations of the original Lotus texture, but moved closer to the orifice allowing every man to experience all this sleeve has to offer.

Characteristics

The Mini-Lotus inner canal is an advancement of the classic Lotus texture, with the Lotus node located approximately 0.78 inches (2 cm) nearer to the front. The Mini-Lotus insert has been especially designed for men with a shorter penis length (4 inches and less) who are unable to reach the Lotus chamber of the classic Lotus insert or only able to reach a part of it.

The structure of the Mini-Lotus canal is very similar to that of the Lotus canal. A new feature is an additional small chamber at the canal entrance with tight 0.4 inch entry and exit points. This is followed by, as in the classic Lotus insert, a large pre-chamber, the convex-concave Lotus node and a second large chamber. The large chambers measure 0.6 x 0.6 inch (15 x 15 mm) and thus are a bit smaller than those in the classic Lotus canal. Next, a 0.6 inch long connection canal with a diameter of 0.4 inch leads to the chambers in the rear part of the insert. These chambers are the same size as the chambers inside the Lotus insert (0.6 x 0.8 inch) and, because of the more forwardly located Lotus node, there was enough space to add an additional fifth chamber to the Mini-Lotus canal.

Other

Because of the large number of chambers, the clean-up of the Mini-Lotus insert is quite time-consuming and you should thus briefly turn the insert inside out. Drying time is average, taking about 3-4 hours. This texture is not to be confused with the Mini-Lotus Lager, from the SIAC line.

Description

Take control of the tightness with the Blade by Fleshlight. The Blade features a beautifully designed squeezable hilt-shaped case and a new sharply intense texture.

Characteristics

The Fleshlight Blade canal is a multi-chamber system which consists of four differently sized chambers and which is covered by a distinctive ribbed texture along the entire length. The chambers have been deliberately designed with a relatively wide diameter of up to 0.8 inches (20 mm) so that they can be tightened by squeezing the flexible masturbator case.

The Blade canal starts with a 1.2 inch (30 mm) entry passage with smooth side walls which extends to the first 0.6 x 0.6 inch (15 x 15 mm) wide chamber. From this point, a highly dense cross-rib texture begins, which covers the entire length of the inner canal and the surface of all chambers that follow. These ribs are each 0.1 inch (3 mm) wide and separated by 0.15 inch (4 mm) wide ridges. Next there is a tight 0.4 inch (10 mm) connecting canal that expands after a length of 0.6 inches (15 mm) to the second chamber. This chamber has a circular shape and measures 0.8 x 0.8 inches (20 x 20 mm). The passage to the next chamber is 0.4 inch (10 mm) wide and is again very tight. The third chamber has an elliptical shape and is 1.2 inches (30 mm) long and expands to a diameter of up to 0.8 inches (20 mm). After a further 0.4 inch (10 mm) connecting passage comes the fourth and last chamber of the canal. This chamber is also elliptically shaped, has a diameter of up to 0.8 inches (20 mm) and is, with a length of 2.7 inches (20 mm), the largest chamber of the Blade insert.

Other