Tight Squeeze vs. Bump N Grind Texture Comparison

Description

The Wall (aka Tight Squeeze) is Lupe's Fuentes' signature texture. The wall is created to simulate what it would be like to "bottom out" inside Lupe's tiny body. The micro rib entry goes throughout the sleeve and narrows into the tightest opening we've ever offered.

Characteristics

The canal opens with a narrow entrance, which widens into an elongated chamber with a diameter of 16 mm. The walls of the chamber are covered with a fine structure of transverse ribs, each 1 mm wide. At the end of the chamber, the canal narrows down to 10 mm.

Measurements

Sleeve length: approx. 9.0"
Orifice depth: approx. 1.25"
Inner texture length: approx. 7.75"
Case length: 10"

Other

Also known as The Wall

Description

First you'll enter past the three rows of alternating speed bumps and ribs, then on to the grinding action of the vortex, another set of bumps, and then vortex again, and if you're still going, you've got one more soft set of larger bumps that will softly welcome you home with a nice hug.

Characteristics

The canal texture starts with a 0.8 x 0.6 inch (20 x 15 mm) smooth walled chamber, which has a ring of flat hemispheric bumps at the end. The shape and size of the bumps is comparable to those of the Speed Bump Insert. Next is a 0.4 x 0.6 inch (10 x 15 mm) chamber containing another ring of hemispheric bumps. This is followed by a third 2.35 x 0.7 inch (40 x 18 mm) chamber that has a ring of hemispheric bumps at the chamber entrance as well as the exit with a zigzag-shaped ridge texture in the center. Experienced Fleshlight users will be familiar with this ridge texture because it has been partially borrowed from the Vortex Insert. The fourth chamber has the same structure as the preceding chamber except for some additional bumps at the end.

Measurements

Other