Frankenstein vs. Blade Texture Comparison

Description

You will scream "It's Alive!" when you experience the feeling of this abhorred monster. Made with Fleshlight's? patented SuperSkin material in stunning detail, you are sure to have an electrifying night.

Characteristics

Despite the strange outward appearance, these inner values are highly presentable: The canal begins with a 0.4 inch (10 mm) tight entrance passage which merges, after 0.8 inch (20 mm), immediately into a convex-concave Lotus node. Behind the Lotus node is a 0.6 x 0.4 inch wide chamber with a ring of six flat and hemispheric bumps inside. The bumps are similar in size and dimensions to those of the Bump N Grind insert. Next, the canal widens to a funnel-shaped main chamber with a diameter of 0.8 inch (20 mm) and a length of 2.0 inches (50 mm). The surface of the main chamber is almost completely covered with six 0.1 inch (2 mm) wide cross ribs with the three-piece Torrid-flap located at the end. The canal then tightens again to a diameter of of 0.55 inch (14 mm) and here the surface is covered by four distinctive zigzag seams that face each other and extend through to the end of the canal.

Other

The suction effect ranks in the upper mid-field. After several back and fourth movements, the relatively wide main chamber in particular is able to collect a lot of vacuum, which additionally supports the stimulation of the different textures.

The clean-up of the Frankenstein Fleshlight is rather involved because the Lotus node and the large chamber have to be thoroughly cleaned. The drying time is comparatively long, taking roughly 4 - 5 hours.

Description

Take control of the tightness with the Blade by Fleshlight. The Blade features a beautifully designed squeezable hilt-shaped case and a new sharply intense texture.

Characteristics

The Fleshlight Blade canal is a multi-chamber system which consists of four differently sized chambers and which is covered by a distinctive ribbed texture along the entire length. The chambers have been deliberately designed with a relatively wide diameter of up to 0.8 inches (20 mm) so that they can be tightened by squeezing the flexible masturbator case.

The Blade canal starts with a 1.2 inch (30 mm) entry passage with smooth side walls which extends to the first 0.6 x 0.6 inch (15 x 15 mm) wide chamber. From this point, a highly dense cross-rib texture begins, which covers the entire length of the inner canal and the surface of all chambers that follow. These ribs are each 0.1 inch (3 mm) wide and separated by 0.15 inch (4 mm) wide ridges. Next there is a tight 0.4 inch (10 mm) connecting canal that expands after a length of 0.6 inches (15 mm) to the second chamber. This chamber has a circular shape and measures 0.8 x 0.8 inches (20 x 20 mm). The passage to the next chamber is 0.4 inch (10 mm) wide and is again very tight. The third chamber has an elliptical shape and is 1.2 inches (30 mm) long and expands to a diameter of up to 0.8 inches (20 mm). After a further 0.4 inch (10 mm) connecting passage comes the fourth and last chamber of the canal. This chamber is also elliptically shaped, has a diameter of up to 0.8 inches (20 mm) and is, with a length of 2.7 inches (20 mm), the largest chamber of the Blade insert.

Other