Bi-Hive vs. Eros Texture Comparison

Description

The Bi-Hive texture is a unique labyrinth designed to both stimulate and increase stamina for the user. Upon entering the sleeve your senses are raised by subtle resistance bristols that gently massage the user with 360 degrees of pleasure. A gentle ribbed passageway leads into a variable stimulation chamber with enhanced pleasure-points that increase sensation, carrying the user to a satisfying and breath-taking climax.

Characteristics

The Bi-Hive canal has a consistent diameter of 0.8 inch (20 mm) and the canal is narrowed at only a few spots to 0.6 inch (16 mm) by the bumps and cross-ribs. At the canal entrance are four wide large-sized Stamina bumps, which we already know from the Stamina Training Unit. Closely behind is a spherical chamber, filled with spike-shaped 0.15 inch (4 mm) bumps that face each other. Next comes a cylindrical tube covered with the same spike-shaped bumps but here they are set at 45? angles in the direction to the canal entrance.


The cylindrical tube is followed by an oval chamber with three 0.1 inch (3 mm) wide cross-ribs (similar to those of the Blade canal) and another cylindrical tube with three bump rings, in staggered arrangement, each consisting of four Stamina bumps. Next is a second spherical chamber with spike-shaped bumps and at the end of the canal is a highly dense cross-rib texture, similar to that of the Super Ribbed insert.

Measurements

Description

Wanna get Wilde? Austin Wilde's exclusive texture Eros is sure to please.

Characteristics

The Eros has a multi-chamber system consisting of five chambers. The surfaces of the canal walls are almost completely covered with an impressive texture-landscape of different crosswise ribs, lengthwise ribs and rings of bumps. The Eros canal is the exclusive inner texture of the gay porno star Austin Wilde and is therefore only available in combination with his butt orifice.

The entry canal of the Eros insert is 0.8 inch (20 mm) in length with a diameter of 0.6 inch (15 mm) that transverses into the first chamber. The first chamber is cone-shaped and also is 0.8 inch (20 mm) in length. The chamber diameter is initially 0.7 inch (18 mm) and then it tightens toward the rear to 0.55 inch (14 mm). Inside the chamber is a ring of six 0.15 inch (4 mm) wide bumps, followed by a very distinctive 0.2 x 0.2 inch (5 x 5 mm) wave. The surface at the end of the chamber is covered with a mesh of crossed lengthwise and crosswise ribs, which are each 0.07 x 0.11 inch (2 x 3 mm) in size and which tighten the canal diameter at the passage to the second chamber to 0.4 inch (10 mm).

The following second, third and fourth chambers are all pine cone-shaped, are 1.6 inch (40 mm) in length and have a diameter of 0.4 - 0.7 inch (10 - 18 mm). Again at the start and end of each chamber is the meshed rib texture while the middle has a ring of bumps followed by a distinctive wave. The fifth chamber is similarly structured, the difference being that the surface texture ends at the middle wave and, from that point on, is smooth and untextured.

Measurements

Sleeve length: approx. 9.0"
Orifice depth: approx. 1.25"
Inner texture length: approx. 7.75"
Case length: 10"