Bi-Hive vs. Blade Texture Comparison

Description

The Bi-Hive texture is a unique labyrinth designed to both stimulate and increase stamina for the user. Upon entering the sleeve your senses are raised by subtle resistance bristols that gently massage the user with 360 degrees of pleasure. A gentle ribbed passageway leads into a variable stimulation chamber with enhanced pleasure-points that increase sensation, carrying the user to a satisfying and breath-taking climax.

Characteristics

The Bi-Hive canal has a consistent diameter of 0.8 inch (20 mm) and the canal is narrowed at only a few spots to 0.6 inch (16 mm) by the bumps and cross-ribs. At the canal entrance are four wide large-sized Stamina bumps, which we already know from the Stamina Training Unit. Closely behind is a spherical chamber, filled with spike-shaped 0.15 inch (4 mm) bumps that face each other. Next comes a cylindrical tube covered with the same spike-shaped bumps but here they are set at 45? angles in the direction to the canal entrance.


The cylindrical tube is followed by an oval chamber with three 0.1 inch (3 mm) wide cross-ribs (similar to those of the Blade canal) and another cylindrical tube with three bump rings, in staggered arrangement, each consisting of four Stamina bumps. Next is a second spherical chamber with spike-shaped bumps and at the end of the canal is a highly dense cross-rib texture, similar to that of the Super Ribbed insert.

Description

Take control of the tightness with the Blade by Fleshlight. The Blade features a beautifully designed squeezable hilt-shaped case and a new sharply intense texture.

Characteristics

The Fleshlight Blade canal is a multi-chamber system which consists of four differently sized chambers and which is covered by a distinctive ribbed texture along the entire length. The chambers have been deliberately designed with a relatively wide diameter of up to 0.8 inches (20 mm) so that they can be tightened by squeezing the flexible masturbator case.

The Blade canal starts with a 1.2 inch (30 mm) entry passage with smooth side walls which extends to the first 0.6 x 0.6 inch (15 x 15 mm) wide chamber. From this point, a highly dense cross-rib texture begins, which covers the entire length of the inner canal and the surface of all chambers that follow. These ribs are each 0.1 inch (3 mm) wide and separated by 0.15 inch (4 mm) wide ridges. Next there is a tight 0.4 inch (10 mm) connecting canal that expands after a length of 0.6 inches (15 mm) to the second chamber. This chamber has a circular shape and measures 0.8 x 0.8 inches (20 x 20 mm). The passage to the next chamber is 0.4 inch (10 mm) wide and is again very tight. The third chamber has an elliptical shape and is 1.2 inches (30 mm) long and expands to a diameter of up to 0.8 inches (20 mm). After a further 0.4 inch (10 mm) connecting passage comes the fourth and last chamber of the canal. This chamber is also elliptically shaped, has a diameter of up to 0.8 inches (20 mm) and is, with a length of 2.7 inches (20 mm), the largest chamber of the Blade insert.