Barracuda vs. Cyclone Texture Comparison

Description

The Barracuda texture is a gripping battery of unmatched pleasure. As you enter the sleeve, you will start with a subtle resistance of front facing bristles. A thick passage way then follows into a massaging grip-like feel as you are rubbed and tugged to relief.

Characteristics

The Barracuda canal is divided into two chambers - a small chamber with a length of 1.6 inches (4 cm) at the canal entrance, followed by a large chamber that extends through to the end of the insert. Between the chambers is a 0.4 inch wide (10 mm) circular constriction, which tightens the canal at this spot to a diameter of 0.4 inches (10 mm). Apart from that, the Barracuda canal has a consistent diameter of 0.7 inches (18 mm). (By the way, the picture of the Barracuda canal displayed on the manufacturer's website is not accurate because there it looks as if the canal diameter becomes wider towards the end.)


Inside both chambers are situated plenty of long-stemmed bumps with a length of 0.4 inch (10 mm), protruding at a 45 degree angle into the canal and which are positioned very close to one another. The bumps inside the first chamber point in the direction of the canal entrance and inside the second chamber, in the opposite direction. Experienced Fleshlight users will be familiar with these long-stemmed, pin-shaped bumps and their arrangement in the rear canal part because this texture has been successfully used inside the Vibro Touch Insert.

Description

The spiraling rings of the exclusive Cyclone texture get tighter the deeper you thrust, which when combined with the powerful vibrations offer an experience more intensely pleasurable than even the real thing.

Characteristics

The Fleshlight Vibro Cyclone insert belongs to the Vibro series, which kann be used with three small "Vibrating Bullets", which are put on the sides of the insert.
The inner channel consists of a wide chamber at the beginning while towards the end it becomes more and more constricting, which runs through the whole insert. The diameter of the channel is approximately 18-16 mm in the front region and at the rear region about 12-10 mm. The surface of the channel is covered by a spiral-shaped seam that winds through the main chamber and forms a pronounced wave structure.