Delight vs. Barracuda Texture Comparison

Description

A new signature texture that is complex and sure to please, with bumps and ridges throughout.

Characteristics

The Fleshjack Delight canal consists of a simple tube with an invariable inner diameter of 0.8 inch (20 mm) from beginning to end. The side-wall surface is covered with a combination of three different texture types. The beginning does a double transversely running zigzag rib, each 0.1 inch (2 mm) wide, followed by three 0.05 inch (1 mm) wide cross ribs and culminating with four circularly arranged rows of 0.1 inch (2 mm) wide bumps. This texture combination is then repeated four times up to the end of the canal.

The delicate textures of zigzag ribs and cross ribs create a relatively gentle penis head massage, which alternates with moderately intense pointed stimulations of the bumped areas. Because the canal diameter is rather wide, the tightness sensation is rather weakly pronounced. Only upon penetration into the tight anal orifice is a brief increase in tightness noticeable. Once you have penetrated deeper into the canal, the anal opening warps pleasurably tight around the base of the penis shaft.

The textures inside the Delight insert are well arranged and so, with an average penis length of 5.9 inches (15 cm), you can just reach the third repetition of the ribs and bumps combination. Because of the rather wide canal diameter there is sufficient space for accumulation of vacuum and results in a mediocre intense suction effect.

Measurements

Sleeve length: approx. 9.0"
Orifice depth: approx. 1.25"
Inner texture length: approx. 7.75"
Case length: 10"

Description

The Barracuda texture is a gripping battery of unmatched pleasure. As you enter the sleeve, you will start with a subtle resistance of front facing bristles. A thick passage way then follows into a massaging grip-like feel as you are rubbed and tugged to relief.

Characteristics

The Barracuda canal is divided into two chambers - a small chamber with a length of 1.6 inches (4 cm) at the canal entrance, followed by a large chamber that extends through to the end of the insert. Between the chambers is a 0.4 inch wide (10 mm) circular constriction, which tightens the canal at this spot to a diameter of 0.4 inches (10 mm). Apart from that, the Barracuda canal has a consistent diameter of 0.7 inches (18 mm). (By the way, the picture of the Barracuda canal displayed on the manufacturer's website is not accurate because there it looks as if the canal diameter becomes wider towards the end.)


Inside both chambers are situated plenty of long-stemmed bumps with a length of 0.4 inch (10 mm), protruding at a 45 degree angle into the canal and which are positioned very close to one another. The bumps inside the first chamber point in the direction of the canal entrance and inside the second chamber, in the opposite direction. Experienced Fleshlight users will be familiar with these long-stemmed, pin-shaped bumps and their arrangement in the rear canal part because this texture has been successfully used inside the Vibro Touch Insert.

Measurements